PLANET MGSW-28240F - Manual (Page 162)

Command Guide of MGSW-28240F
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping querier address 192.168.1.15
4.2.57.13 ip igmp snooping querier election
Command:
ip igmp snooping querier election
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
querier IGMP Querier configuration
election Act as an IGMP Querier to join Querier-Election
Default:
Enabled
Usage Guide:
To enable Querier-election of IGMP snooping for specific VLAN
Example:
To enable Querier-election of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping querier election
4.2.57.14 ip igmp snooping query-interval
Command:
ip igmp snooping query-interval <IpmcQi : 1-31744>
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
-162-