PLANET MGSW-28240F - Manual (Page 398)

Command Guide of MGSW-28240F
4.21.75 show platform phy id
Command:
show platform phy id [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
id id
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY ID.
Example:
To display the PHY ID for GigabitEthernet 1/1.
Switch # show platform phy id interface GigabitEthernet 1/1
Port Channel API Base Phy Id Phy Rev.
---- ------- -------- ------- ------
1 0 0 (1g) 8634 0
4.21.76 show platform phy status
Command:
show platform phy status [ interface ( <port_type> [ <v_port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
status status
interface Search by port
Default:
N/A
-398-