PLANET MGSW-28240F - Manual (Page 293)

Command Guide of MGSW-28240F
snmp-server Set SNMP server's configurations
engine-id Set SNMP engine ID
local Set SNMP local engine ID
<Engineid : word10-32> local engine ID
Default:
None
Usage Guide:
To configure the Engine IDof SNMP
Example:
To configure the Engine ID (1234567890) of SNMP
Switch# configure terminal
Switch (config)# snmp-server engine-id local 1234567890
4.2.197 snmp-server host
Command:
snmp-server host <conf_name>
snmp-server Set SNMP server's configurations
host Set SNMP host's configurations
<conf_name> Name of the host configuration
Default:
None
Usage Guide:
To enter the SNMP host mode
Example:
To enter the SNMP host mode (planet)
Switch# configure terminal
-293-