PLANET MGSW-28240F - Manual (Page 160)

Command Guide of MGSW-28240F
Auto
Usage Guide:
To configure IGMP snooping version for specific VLAN
Example:
To configure IGMP snooping V2 for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping compatibility v2
4.2.57.10 ip igmp snooping last-member-query-interval
Command:
ip igmp snooping last-member-query-interval <IpmcLmqi : 0-31744>
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
last-member-query-interval Last Member Query Interval in tenths of seconds
<IpmcLmqi : 0-31744> 0 - 31744 tenths of seconds
Default:
10
Usage Guide:
To configure Last-member-query-interval of IGMP snooping for specific VLAN
Example:
To configure Last-member-query-interval (100 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping last-member-query-interval 1000
4.2.57.11 ip igmp snooping priority
-160-