PLANET MGSW-28240F - Manual (Page 417)

Command Guide of MGSW-28240F
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : default_view
4.21.96 show snmp community v3
Command:
show snmp community v3 [ <community> ]
show Show running system information
snmp Display SNMP configurations
community Community
v3 SNMPv3
<Community : word127> Specify community name
Default:
N/A
Usage Guide:
To display the SNMPv3 Community information.
Example:
To display the SNMPv3 Community information
Switch # show snmp community v3
Community : public
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community : private
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
4.21.97 show snmp host
Command:
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show Show running system information
-417-