208 upnp ttl, 209 username – PLANET MGSW-28240F User Manual
Page 313
Command Guide of MGSW-28240F
4.2.208 upnp ttl
Command:
upnp ttl <1-255>
upnp Set UPnP's configurations
ttl Set TTL value
<1-255> TTL value
Default:
4
Usage Guide:
To configure the TTL of UPnP
Example:
To configure the TTL (8) of UPnP
Switch# configure terminal
Switch (config)# upnp ttl 8
4.2.209 username
Command:
username <username> privilege <priv> password { encrypted <encry_password> |
none | unencrypted <password> }
username Establish User Name Authentication
<Username : word31> User name allows letters, numbers and underscores
privilege Set user privilege level
<privilegeLevel : 0-15> User privilege level
password Specify the password for the user
encrypted Specifies an ENCRYPTED password will follow
none NULL password
unencrypted Specifies an UNENCRYPTED password will follow
<Password : word4-44> The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system internally. You cannot directly use it as
same as the Plain Text and it is not human-readable text
Default:
-313-