PLANET MGSW-28240F - Manual (Page 397)

Command Guide of MGSW-28240F
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY information.
Example:
To display the PHY information for GigabitEthernet 1/1.
Switch # show platform phy interface GigabitEthernet 1/1
Port API Inst WAN/LAN/1G Mode Duplex Speed Link
---- --------- --------- ---- ------ ----- ----
1 Default 1G ANEG - - No
4.21.74 show platform phy failover
Command:
show platform phy failover
show Show running system information
platform Platform specific information
phy PHYs' information
failover Failover status
Default:
N/A
Usage Guide:
To display the PHY failover status.
Example:
To display the PHY failover status.
Switch # show platform phy failover
Port Active Channel Broadcast After reset
---- ------ ------- --------- ------------
-397-