PLANET MGSW-28240F - Manual (Page 395)

Command Guide of MGSW-28240F
Querier status is IDLE
RX MLD Query:0 V1Report:0 V2Report:0 V1Done:0
TX MLD Query:0 / (Source) Specific Query:0
Interface Channel Profile: <No Associated Profile>
4.21.71 show network-clock
Command:
show network-clock
show Show running system information
network-clock Show selector state
Default:
N/A
Usage Guide:
To display the SyncE information.
Example:
To display the SyncE information.
Switch # show network-clock
Selector State is: Free Run
Alarm State is:
Clk: 1 2
LOCS: FALSE FALSE
SSM: FALSE FALSE
WTR: FALSE FALSE
LOL: FALSE
DHOLD: TRUE
SSM State is:
Interface Tx SSM Rx SSM Mode
GigabitEthernet 1/1 QL_NONE QL_LINK Master
-395-