PLANET MGSW-28240F - Manual (Page 307)

Command Guide of MGSW-28240F
Default:
Disabled
Usage Guide:
To enable the Restricted TCN of CIST
Example:
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
4.2.199 switchport vlan mapping
Command:
switchport vlan mapping <group> <vlan_list> <translation_vlan>
switchport Set switching mode characteristics
vlan vlan - Vlan translation
mapping Add VLAN translation entry into a group
<group id : 1-29> Group id
<vlan_list> VLAN list
< translation_vlan > translation VLAN ID
Default:
None
Usage Guide:
To configure the VLAN Translation
Example:
To enable the VLAN Translation (below table)
Switch# configure terminal
Switch (config)# switchport vlan mapping 1 3 5
-307-