PLANET MGSW-28240F - Manual (Page 171)

Command Guide of MGSW-28240F
1
Usage Guide:
To configure Unsolicited-Report-Interval of MLD snooping for specific VLAN
Example:
To configure Unsolicited-Report-Interval (99 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping unsolicited-report-interval 99
4.2.57.28 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function for specific interface
Example:
To disable the function (ip address dhcp) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# no ip address dhcp
4.2.58 ip arp inspection
Command:
ip arp inspection
ip Internet Protocol
-171-