PLANET MGSW-28240F - Manual (Page 427)

Command Guide of MGSW-28240F
Command:
show terminal
show Show running system information
terminal Display terminal configuration parameters
Default:
N/A
Usage Guide:
To display the your login information.
Example:
To display the your login information.
Switch # show terminal
Line is con 0.
* You are at this line now.
Alive from Console.
Default privileged level is 2.
Command line editing is enabled
Display EXEC banner is enabled.
Display Day banner is enabled.
Terminal width is 80.
length is 24.
history size is 32.
exec-timeout is 10 min 0 second.
Current session privilege is 15.
Elapsed time is 0 day 1 hour 12 min 15 sec.
Idle time is 0 day 0 hour 0 min 0 sec.
4.21.107 show upnp
Command:
show upnp
show Show running system information
upnp Display UPnP configurations
-427-