PLANET MGSW-28240F - Manual (Page 236)

Command Guide of MGSW-28240F
proprietary Proprietary Delay Measurement
Default:
Standard
Usage Guide:
To configure Tx mode (proprietary) of MEP.
Example:
To configure Tx mode (proprietary) of MEP 1
Switch# configure terminal
Switch (config)# mep 1 dm proprietary
4.2.123 mep <Instance> dm syncronized
Command:
mep <Instance> dm syncronized
mep Maintenance Entity Point
<Instance> The MEP instance number.
dm Delay Measurement
syncronized Near enad and far end is real time syncronized.
Default:
Enabled
Usage Guide:
To configure Time Sync of MEP.
Example:
To configure Time Sync of MEP 1
Switch# configure terminal
Switch (config)# mep 1 dm syncronized
4.2.124 mep <Instance> down
-236-