PLANET MGSW-28240F - Manual (Page 166)

Command Guide of MGSW-28240F
Default:
Disabled
Usage Guide:
To enable MLD snooping for specific VLAN
Example:
To enable MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping
4.2.57.20 ipv6 mld snooping compatibility
Command:
ipv6 mld snooping compatibility auto | v1 | v2
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
compatibility Interface compatibility
auto Compatible with MLDv1/MLDv2
v1 Forced MLDv1
v2 Forced MLDv2
Default:
Auto
Usage Guide:
To configure MLD snooping version for specific VLAN
Example:
To configure MLD snooping V2 for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping compatibility v2
-166-