PLANET MGSW-28240F - Manual (Page 167)

Command Guide of MGSW-28240F
4.2.57.21 ipv6 mld snooping last-member-query-interval
Command:
ipv6 mld snooping last-member-query-interval <IpmcLmqi : 0-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
last-member-query-interval Last Member Query Interval in tenths of seconds
<IpmcLmqi : 0-31744> 0 - 31744 tenths of seconds
Default:
10
Usage Guide:
To configure Last-member-query-interval of MLD snooping for specific VLAN
Example:
To configure Last-member-query-interval (100 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping last-member-query-interval 1000
4.2.57.22 ipv6 mld snooping priority
Command:
ipv6 mld snooping priority <CosPriority : 0-7>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
priority Interface CoS priority
<CosPriority : 0-7> CoS priority ranges from 0 to 7
Default:
0
-167-