PLANET MGSW-28240F - Manual (Page 304)

Command Guide of MGSW-28240F
edge Edge port
Default:
Disabled
Usage Guide:
To enable the Admin Edge of CIST Aggregated Port
Example:
To enable the Admin Edge of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree edge
4.2.198.8 spanning-tree link-type
Command:
spanning-tree link-type link-type { point-to-point | shared | auto }
spanning-tree Spanning Tree protocol
link-type Port link-type
auto Auto detect
point-to-point Forced to point-to-point
shared Forced to Shared
Default:
Point to Point
Usage Guide:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Example:
To configure the Point to Point mode (Shared) of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree link-type shared
-304-