PLANET MGSW-28240F - Manual (Page 206)

Command Guide of MGSW-28240F
mld Multicast Listener Discovery
snooping Snooping MLD
Default:
Disabled
Usage Guide:
To enable MLD Snooping.
Example:
To enable MLD Snooping.
Switch# configure terminal
Switch (config)# ipv6 mld snooping
4.2.89 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan <vlan_list>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
vlan MLD VLAN
<vlan_list> VLAN identifier(s): VID
Default:
Disabled
Usage Guide:
To enable MLD Snooping for specific VLAN.
Example:
To enable MLD Snooping for VLAN 1.
Switch# configure terminal
Switch (config)# ipv6 mld snooping vlan 1
4.2.90 ipv6 mld ssm-range
-206-