PLANET MGSW-28240F - Manual (Page 281)

Command Guide of MGSW-28240F
refresh Refresh QCE tables in hardware
Default:
None
Usage Guide:
To refresh the QCE
Example:
To refresh the QCE.
Switch# configure terminal
Switch (config)# qos qce refresh
4.2.180 qos wred
Command:
qos wred queue <queue> min-th <min_th> mdp-1 <mdp_1> mdp-2 <mdp_2> mdp-3
<mdp_3>
qos Quality of Service
wred Weighted Random Early Discard
queue Specify queue
<Queue : 0~5> Specific queue or range
min-th Specify minimum threshold
<MinTh : 0-100> Specific minimum threshold in percent
mdp-1 Specify drop probability for drop precedence level 1
<Mdp1 : 0-100> Specific drop probability in percent
mdp-2 Specify drop probability for drop precedence level 2
<Mdp2 : 0-100> Specific drop probability in percent
mdp-3 Specify drop probability for drop precedence level 3
<Mdp3 : 0-100> Specific drop probability in percent
Default:
-281-