PLANET MGSW-28240F - Manual (Page 170)

Command Guide of MGSW-28240F
Switch (config-if-vlan)# ipv6 mld snooping query-max-response-time 600
4.2.57.26 ipv6 mld snooping robustness-variable
Command:
ipv6 mld snooping robustness-variable <IpmcRv : 1-255>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
robustness-variable Robustness Variable
<IpmcRv : 1-255> Packet loss tolerance count from 1 to 255
Default:
2
Usage Guide:
To configure Robustness Variable of MLD snooping for specific VLAN
Example:
To configure Robustness Variable (88) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping robustness-variable 88
4.2.57.27 ipv6 mld snooping unsolicited-report-interval
Command:
ipv6 mld snooping unsolicited-report-interval <IpmcUri : 0-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
robustness-variable Robustness Variable
<IpmcUri : 0-31744> 0 - 31744 seconds
Default:
-170-