PLANET MGSW-28240F - Manual (Page 295)

Command Guide of MGSW-28240F
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)#end
Switch#
4.2.197.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)#exit
Switch (config)#
4.2.197.4 host
Command:
host [<hostname> | <ipv4_ucast> | <ipv6_ucast>] <UdpPort : 1-65535> { informs |
traps }
host host configuration
<hostname> hostname of SNMP trap host
<ipv4_ucast> IP address of SNMP trap host
-295-