PLANET MGSW-28240F - Manual (Page 336)

Command Guide of MGSW-28240F
4.19.2 reload defaults
Command:
reload defaults [ keep-ip ]
reload Reload system
defaults Reload defaults without rebooting.
keep-ip Attempt to keep VLAN1 IP setup.
Default:
N/A
Usage Guide:
To store the device factory default settings.
Example:
To store the device factory default settings.
Switch# reload defaults
4.20 send
4.20.1 send
Command:
send { * | console 0 | vty <vty_list> } <message>
reload Reload system
* All tty lines
console Primary terminal line
vty Virtual terminal
Default:
N/A
Usage Guide:
-336-