PLANET MGSW-28240F - Manual (Page 77)

Command Guide of MGSW-28240F
Example:
To configure ERPS version 1 for the specific profile 1.
Switch# configure terminal
Switch (config)# erps 1 version 1
4.2.50 erps <1-64> vlan
Command:
erps <1-64> vlan { none | [ add | remove ] <vlans> }
<1-64> ERPS group number
<vlan_list> List of VLANs
add Add to set of included VLANs
none Do not include any VLANs
remove Remove from set of included VLANs
Default:
V2
Usage Guide:
To configure ERPS VLANs for the specific profile.
Example:
To configure ERPS VLANs(VLAN5 - VLAN8) for the specific profile 1.
Switch# configure terminal
Switch (config)# erps 1 vlan add 5-8
4.2.51 exit
Command:
exit
Default:
N/A
Usage Guide:
To exit configure terminal mode.
Example:
-77-