PLANET MGSW-28240F - Manual (Page 134)

Command Guide of MGSW-28240F
Example:
To enable Tag-remark default mode (PCP:1 , DEI:1) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos tag-remark pcp 1 dei 1
4.2.56.101 qos tag-remark mapped
Command:
qos tag-remark mapped
qos Quality of Service
tag-remark Tag remarking configuration
mapped Used mapped values (cos,dpl -> pcp,dei)
Default:
Classified
Usage Guide:
To enable Tag-remark mapped mode of QoS for specific interface
Example:
To enable Tag-remark mapped mode of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos tag-remark mapped
4.2.56.102 qos trust dscp
Command:
qos trust dscp
qos Quality of Service
trust Trust configuration
dscp DSCP value
Default:
Disabled
-134-