PLANET MGSW-28240F - Manual (Page 91)

Command Guide of MGSW-28240F
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # exit
Switch (config)#
4.2.56.21 flowcontrol
Command:
flowcontrol off | on
flowcontrol Traffic flow control.
off Disable flow control.
on Enable flow control.
Default:
Disable
Usage Guide:
To enable Flow-control for specific interface
Example:
To enable Flow-control for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # flowcontrol on
4.2.56.22 green-ethernet energy-detect(GG)
Command:
green-ethernet energy-detect
green-ethernet Green ethernet (Power reduction)
energy-detect Enable power saving for ports with no link partner.
Default:
N/A
Usage Guide:
To enable power saving for ports with no link partner
-91-