PLANET MGSW-28240F - Manual (Page 92)

Command Guide of MGSW-28240F
Example:
To enable power saving for ports with no link for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet energy-detect
4.2.56.23 green-ethernet short-reach(GG)
Command:
green-ethernet short-reach
green-ethernet Green ethernet (Power reduction)
short-reach Enable power saving for ports which is connect to link partner with short cable.
Default:
N/A
Usage Guide:
To enable power saving for ports with short cable
Example:
To enable power saving for ports with short cable for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet short-reach
4.2.56.24 gvrp join-request vlan(GG)
Command:
gvrp join-request vlan <vlan_list>
gvrp Enable GVRP on port(s)
join-request Emit a Join-Request for test purpose
Default:
N/A
Usage Guide:
To send GVRP Join-Request to specific interface
-92-