1 do, 2 editing – PLANET MGSW-28240F User Manual
Page 210
Advertising
Command Guide of MGSW-28240F
To enter line mode (vty 1)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#
4.2.94.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.94.2 editing
Command:
editing
editing Enable command line editing
Default:
-210-
Advertising