Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 21)

21
Navi
1
1
1
2
2
2
EXIT
Keyboard
Motion assign
Automatically plays the recorded motion.
Assigns parameters to the X and Y axes of the motional pad.
¹ You can assign these parameters while the MOTION ASGN-X (or Y) screen is shown by operating a knob or slider (You can also set
this from the MOTION SETTING screen).
¹ Refer to this list for the assignable parameters. Ø “Panel parameter assignment list”
MOTIONAL PAD ON/OFF Turns the motion on
MOTIONAL PAD ON/OFF Turns the motion off
Motion begins playing back
Motion stops playing back
Motion play
* You can configure the playback start
timing, playback speed, loop on/
off and so forth from the MOTION
SETTING screen.
Ø “MOTION SETTING”
TOP
TOP
MOTION REC
Knob
Assigns the parameter
selected to the X axis
VALUE Adjusts the depth
Operate
the pad
Controls the assigned
parameter
Knob
Assigns the parameter
selected to the Y axis
VALUE Adjusts the depth
MOTION ASGN-X
MOTION ASGN-Y
SHIFT+
P-MOD
SHIFT+
S-MOD
VALUE Selects a template
SHIFT+
VALUE
Sets the start point of
the shape
EXIT Cancel
ENTER
Turns the motion on
and moves the screen