Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 43)

43
Navi
Overview of the GAIA-2 Connecting to an external device
A MIDI IN, MIDI OUT connectors
You can connect a MIDI device to this connector.
B PEDAL jack
You can connect an expression pedal (EV-5, sold separately)
or pedal switch (DP series, sold separately) to this jack.
* Be sure to use only one of these specified pedals. Connecting
expression pedals made by third-party manufacturers may
cause this unit to malfunction.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
A D E C B
C USB MEMORY/EXT DEVICE port (USB A)
Connect a commercially available USB flash drive, external
USB device or Roland Cloud Connect (WC-1) here.
* Never turn off the power or unplug the USB flash drive while
“ ÀÀ %” is shown in the display, which indicates that the a
write operation is in progress.
D USB COMPUTER port (USB Type-C ® )
Connect the USB port of your computer or mobile device to
this port.
* Do not use a USB cable that is designed only for charging.
Charge-only cables cannot transmit data.
E Ground terminal
Connect this to an external earth or ground if necessary.