44 reverse dly (reverse delay), Navi, Mfx list – Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer User Manual

Page 86

Advertising
background image

86

Navi

MFX List

Parameter

Value

Explanation

DLTime Nt

Note

1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,

1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2

Dly R Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

DR.Time

1–2600

Adjusts the time until the right delay sound is heard.

DRTime Nt

Note

1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,

1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2

Dly C Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

DC.Time

1–2600

Adjusts the time until the center delay sound is heard.

DCTime Nt

Note

1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,

1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2

C Feedback

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect

(Negative values invert the phase).

HF Damp

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to

filter out any high frequencies, set this parameter to

BYPASS

.

200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS

[Hz]

Left Lv

0–127

Volume of each delay sound

Right Lv

0–127

Center Lv

0–127

Low Gain

-15–+15 [dB]

Amount of boost/cut for the low-frequency range

High Gain

-15–+15 [dB]

Amount of boost/cut for the high-frequency range

Balance

D100:0W–D0:100W

Volume balance between the direct sound (D) and the delay sound (W)

Level

0–127

Output Level

44 Reverse Dly (Reverse Delay)

This is a reverse delay that adds a reversed and delayed sound to the input sound. A tap delay is connected immediately after the

reverse delay.

R out

R out

L out

L out

L in

L in

Rev.

Rev.

Delay

Delay

Delay

Delay

2-Band

2-Band

EQ

EQ

2-Band

2-Band

EQ

EQ

D1

Rev

D2

D3

Feedback

R in

R in

Parameter

Value

Explanation

Threshold

0–127

Volume at which the reverse delay will begin to be applied

RDly Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

RD.Time

1–1300

Delay time from when sound is input into the reverse delay until the delay

sound is heard

RD.Time Nt

Note

1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,

1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2

RDly Fbk

-98–+98 [%]

Proportion of the delay sound that is to be returned to the input of the

reverse delay negative (-) values invert the phase)

Advertising