Navi, Realtime rec – Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer User Manual
Page 28
28
1
3
2
4
Realtime rec
REC
Jump to REC STANDBY
screen
* The [1]–[16] buttons operate in sequencer-
only mode during recording.
START/STOP
Realtime REC start
* The count-in sounds before recording starts.
Keyboard
Note input
Knob
Input motion (control
change message)
Sliders
* Realtime rec is loop recording.
* Overdubbing is possible.
* The [1]–[16] buttons corresponding to the
steps that contain inputted notes light up.
REC
Switch between realtime
rec/pattern play
START/STOP
Realtime REC
stop
EXIT
EDIT+
REST
Long-press
Clear Step
* Long-press [REST] while long-
pressing [EDIT] to clear the data
inputted into the steps that play while
you’re holding down the buttons.
Clear
Playback direction
EDIT
REST
Loop
TOP (pattern stop)
TOP (pattern play)
STANDBY
REALTIME REC
This recording method lets you record loops by playing the keyboard or controllers in real time while listening to the click sound.
¹
You can seamlessly switch between realtime rec and pattern play without stopping the pattern playback.
¹
You can clear (delete) part of the data you recorded.
¹
Refer to the list for the parameters for which motions can be recorded.
Ø