Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 83)

83
Navi MFX List
Delay
40 Delay
This is a stereo delay.
When Feedback Mode is CROSS: When Feedback Mode is NORMAL:
R out R out
L out L out
2-Band 2-Band
EQ EQ
2-Band 2-Band
EQ EQ
Balance W
Balance W
Feedback
Feedback
Balance D
Balance D
L in L in
Delay Delay
Delay Delay
R in R in R out R out
L out L out
2-Band 2-Band
EQ EQ
2-Band 2-Band
EQ EQ
Balance W
Balance W
Feedback
Feedback
Balance D
Balance D
L in L in
Delay Delay
Delay Delay
R in R in
Parameter Value Explanation
Dly L Sync OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
DL.Time 1–1300 Adjusts the time until the left delay sound is heard.
DLTime Nt Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Dly R Sync OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
DR.Time 1–1300 Adjusts the time until the right delay sound is heard.
DRTime Nt Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Phase L NORMAL, INVERSE Phase of the left-right delay sound.
NORMAL: Non-inverted
INVERSE: Inverted
Phase R NORMAL, INVERSE
Fbk Mode NORMAL, CROSS
Selects the way in which delay sound is fed back into the effect (See the
figures above).
Feedback -98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the effect
(Negative values invert the phase).
HF Damp
Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to
filter out any high frequencies, set this parameter to BYPASS .
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
[Hz]
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Level 0–127 Output Level