Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 98)

98
Navi
02 Modulation Reverb
A reverb that inputs the modulated original sound.
L out L out
R out R out
Send Amount
Modulation Modulation
Hi Cut Hi Cut
EQ EQ
Lo Cut Lo Cut
EQ EQ
Reverb Reverb
L in L in
R in R in
Effect Level
Effect Level
Direct Level
Direct Level
Parameter Value Explanation
Modulation
Depth
0–127 Adjusts the depth of modulation.
Rate 0.05–5.00 [Hz] Adjusts the frequency of modulation.
Time 0–100 Adjusts the decay length of the reverb sound.
Low Cut
Sets the base frequency for cutting the low-frequency portion of the inputted modulated sound.
FLAT, 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800 [Hz]
High Cut
Sets the base frequency for cutting the high-frequency portion of the inputted modulated sound.
630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, FLAT (Hz)
Pre Delay 0–100
Adjusts how long it takes until the reverb sound is heard, after the direct
sound plays.
Density 0–100 Adjusts the density of the reverb sound.
Direct Level 0–127 Adjusts the volume of the original sound.
Effect Level 0–127 Adjusts the volume of the reverb sound.
03 INTEGRA-7 Reverb
A reverb built into the Roland INTEGRA-7 sound module.
Dry Level
L out L out
R out R out
Send Amount
Send Amount
INTEGRA7 INTEGRA7
Reverb Reverb
L in L in
R in R in
Wet Level
Dry Level
Wet Level
Parameter Value Explanation
Char
ROOM1,
ROOM2,
HALL1,
HALL2,
PLATE
Selects the type of reverb.
PreDelay 0–100
Adjusts the delay time from when the direct sound plays until the reverb
sound is heard.
Time 0.1–10.0 [sec] Adjusts the decay length of the reverb sound.
Density 0–127 Adjusts the density of the reverb sound.