Allied Telesis AT-S63 - Manual (Page 100)

Chapter 6: MAC Address Table
100 Section I: Basic Operations
Deleting All Dynamic MAC Addresses
To delete all dynamic unicast and multicast MAC addresses from the MAC
address table, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page opens with the MAC Address tab selected by
default, as shown in Figure 23 on page 94.
3. In the Delete All Dynamic MAC Addresses section, click Delete.
All dynamic unicast and multicast MAC address are deleted from the
switch. The switch immediately begins to learn new dynamic
addresses.