Allied Telesis AT-S63 - Manual (Page 119)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 119
Deleting a Port Mirror
To delete a port mirror so that you can use the destination port for normal
network operations, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Layer 1 option.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 30 on page 114.
4. Click Modify.
The Modify Mirror page is shown in Figure 31 on page 115.
5. Click the Enable Mirror checkbox to remove the check and disable the
mirror.
6. Click the destination port (white port) until it is black.
7. Click Apply.
The destination port can now be used for normal network operations.
8. To permanently save your changes, select the Save Config option in
the Configuration menu.