Allied Telesis AT-S63 - Manual (Page 326)

Chapter 20: Multiple Spanning Tree Protocol
326 Section IV: Spanning Tree Protocols
Displaying the MSTP Configuration
To display the MSTP configuration, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the Spanning Tree tab.
The Spanning Tree tab is shown in Figure 113 on page 292.
This tab displays information on whether spanning tree is enable or
disabled and which protocol version, STP, RSTP, or MSTP is active.
4. Click View.