Allied Telesis AT-S63 - Manual (Page 120)

Chapter 8: Port Mirroring
120 Section I: Basic Features
Displaying the Port Mirror
To display the port mirror, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 option.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 33.
Figure 33. Port Mirroring Tab (Monitoring)
The tab displays a table with the following columns:
Mirror to Port
The destination port where the traffic is copied and where the network
analyzer is located.
Ingress Port(s)
The source ports whose ingress traffic is mirrored to the destination
port.
Egress Port(s)
The source ports whose egress traffic is mirrored to the destination
port.
Status
The status of the mirroring feature. The possible settings are:
Enabled - Traffic is being copied to the destination port.
Disabled - No traffic is being mirrored.