Displaying the gvrp state machine, Table 15: gvrp state machine parameters – Allied Telesis AT-S63 User Manual
Page 356
Chapter 22: GARP VLAN Registration Protocol
356
Section V: Virtual LANs
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 138 on page 353.
4. In the View GVRP Parameters section, click View GVRP State
Machine for VLAN and enter the VLAN number in the box.
5. Click View.
The GVRP State Machine for VLAN page is shown in Figure 141.
Figure 141. GVRP State Machine for VLAN Page
The GVRP State Machine for VLAN page provides the information
shown in
Table 12. GVRP State Machine Parameters
Parameter
Meaning
Port
Port number on the switch; this port belongs to
the GARP application. If the GARP application
has no ports, “No ports have been assigned” is
displayed.