Displaying the management access control list – Allied Telesis AT-S63 User Manual
Page 423
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security
423
Displaying the Management Access Control List
To display the management access control list and its access control
entries, perform the following procedure:
1. From the home page, select Monitoring.
2. From the Monitoring menu, select the Mgmt. Security option.
3. Select the Mgmt ACL tab.
The Mgmt. ACL tab is shown in Figure 169.
Figure 169. Mgmt. ACL Tab (Monitoring)
The top section of the tab displays the status of the Management ACL
as enabled or disabled. The bottom section lists the existing ACEs. For
definitions of the columns, refer to “Creating an ACE” on page 420.
Advertising