Allied Telesis AT-S63 - Manual (Page 241)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 241
4. To create an SNMPv3 Access Table entry, click Add.
The Add New SNMPv3 Access page is shown in Figure 87.
Figure 87. Add New SNMPv3 Access Page
5. In the Group Name field, enter a descriptive name of the group.
The Group Name can consist of up to 32 alphanumeric characters.
You are not required to enter a unique value here because the
SNMPv3 Access Table entry is indexed with the Group Name, Security
Model, and Security Level parameter values. However, a unique group
name makes it easier for you to tell the groups apart.
There are four default values for this field that are reserved for
SNMPv1 and SNMPv2c implementations:
ˆ defaultV1GroupReadOnly
ˆ defaultV1GroupReadWrite
ˆ defaultV2cGroupReadOnly
ˆ defaultV2cGroupReadWrite
Note
The Context Prefix field is a read only field. The Context Prefix field
is always set to null.
6. In the Read View Name field, enter a value that you configured with
the View Name parameter in the SNMPv3 View Table.