Allied Telesis AT-S63 - Manual (Page 37)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 37
Saving Your Parameter Changes
A change to a switch parameter is, in most cases, immediately activated
as soon as you click the Apply button on a web page. However, a change
is initially saved only to temporary memory and will be lost the next time
you reset or power cycle the unit. To permanently save a change, you
must click the Save Config option in the main menu, as shown in Figure 4.
Selecting the option updates the switch’s active configuration file. A
change saved to the active configuration file is retained even when the unit
is powered off or reset. This menu option is only displayed after you have
made a configuration change. After you click Save Config, your change is
added to the active configuration file and the option is removed from the
menu.
Figure 4. Save Config Option in the Configuration Menu
Save Config
Option