Allied Telesis AT-S63 - Manual (Page 179)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 179
Displaying the CoS Settings
To display the CoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Services.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 57.
Figure 57. CoS Tab (Monitoring)
3. Click the port whose settings are to be displayed. You can select more
than one port. A selected port turns white. (To deselect a port, click it
again.)
4. Click View.
The CoS Setting for Port page is shown in Figure 58.
Figure 58. CoS Setting for Port Page