Displaying securitytogroup table entries, Figure 107: snmpv3 access table tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 282
Advertising
Chapter 18: SNMPv3
282
Section III: SNMPv3
The SNMPv3 Access Table tab is shown in Figure 107.
Figure 107. SNMPv3 Access Table Tab (Monitoring)
Displaying
SecurityToGroup
Table Entries
To display entries in the SNMPv3 SecurityToGroup Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 9 on page 57.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 104 on page 279.
3. In the SNMPv3 section, click the button next to the View
SecurityToGroup Table and then click View at the bottom of the tab.
Advertising