Allied Telesis AT-S63 - Manual (Page 202)

Chapter 15: Quality of Service
202 Section II: Advanced Operations
The Modify Policy page is shown in Figure 70.
Figure 70. Modify Policy Page
5. Modify the parameters as needed. For parameter definitions, refer to
“Configuring a Policy” on page 198.
6. When you are finished configuring the parameters, click Apply.
The changes are immediately implemented in the policy.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Deleting a Policy
To delete a policy, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Services option.
3. Select the Policies tab.
The Policies tab is shown in Figure 68 on page 198.
4. Select a policy from the list and click Delete. You can only delete one
policy at a time.
The policy is deleted from the switch.