Allied Telesis AT-S63 - Manual (Page 163)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 163
Displaying the Classifiers
To display the classifiers, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Configuration menu, select the Network Security or
Services option. The Classifier tab is accessible from both menu
selections.
3. Select the Classifiers tab.
The Classifiers tab is shown in Figure 48.
Figure 48. Classifier Tab (Monitoring)
The Classifier tab displays a table of the currently configured
classifiers that contains the following columns of information:
ID
The ID number of the classifier.
Description
A description of the classifier.
No. of References
The number of active and inactive ACLs and QoS policies to which the
classifier is currently assigned. An active ACL or QoS is assigned to at
least one switch port, while an inactive ACL or QoS policy is currently
not assigned to any port. If this column is 0 (zero), the classifier is not
assigned to any ACLs or policies, active or inactive.