Allied Telesis AT-S63 - Manual (Page 41)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 41
Restrictions to the Web Browser Interface
The following management tasks are not support from the web browser
interface. They must be performed from the menus interface or the
command line interface. Management tasks marked with an asterisk (*)
are only supported from the command line interface.
ˆ Configuring LACP port trunks
ˆ Configuring MAC address-based and protected ports VLANs
ˆ Copying, renaming, and deleting files from the file system or from a
compact flash memory card
ˆ Configuring routing interfaces
ˆ Configuring static IPv4 routes*
ˆ Configuring Routing Information Protocol (RIP) versions 1 and 2*
ˆ Changing directories on a compact flash memory card
ˆ Uploading or downloading files to a compact flash memory card
ˆ Creating a new switch configuration file
ˆ Modifying the event log full action
ˆ Configuring MLD snooping
ˆ Configuring RRP snooping
ˆ Creating, deleting, importing, and exporting encryption keys
ˆ Creating SSL self-signed certificates
ˆ Generating an SSL certificate enrollment request
ˆ Copying SSL certificates into the certificate database or modifying
certificates
ˆ Formatting flash memory
ˆ Transferring the AT-S63 image file or a configuration file from a master
switch to a slave switch (i.e., switch to switch upload)
ˆ Adjusting the baud rate on the serial terminal port
ˆ Configuring the management console timer
ˆ Forcing a port to renegotiate its settings with a remote node
ˆ Enabling and disabling the Telnet server
ˆ Configuring the Telnet NULL character parameter
ˆ Configuring the console startup mode
ˆ Configuring the web browser server