Allied Telesis AT-S63 - Manual (Page 422)

Chapter 28: Management Access Control List
422 Section VII: Management Security
Deleting an ACE
To delete an ACE from the Management ACL, perform the following
procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Mgmt. Security option.
3. Select the Mgmt. ACL tab.
The tab is shown in Figure 168 on page 419.
4. Select the ACE to be deleted from the Management ACL List section
in the tab and click Delete.
The ACE is deleted from the switch.
5. To permanently save your changes, select the Save Config option in
the Configuration menu.