Allied Telesis AT-S63 - Manual (Page 325)

AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Spanning Tree Protocols 325
Table 11 lists the MSTP port costs with the Auto setting when the port
is part of a port trunk.
Edge Port
This parameter defines whether the port is functioning as an edge port.
The possible settings are Yes and No. For an explanation of this
parameter, refer to “Point-to-Point and Edge Ports” in Chapter 22,
“Spanning Tree and Rapid Spanning Tree Protocols” in the AT-S63
Management Software Menus Interface User’s Guide.
8. After configuring the parameters, click Apply.
9. To permanently save your changes, select the Save Config option in
the Configuration menu.
10. Repeat this procedure to configure the MSTP parameters for other
switch ports.
Table 11. MSTP Auto External Path Trunk Costs
Port Speed Port Cost
10 Mbps 20,000
100 Mbps 20,000
1000 Mbps 2,000