Allied Telesis AT-S63 - Manual (Page 196)

Chapter 15: Quality of Service
196 Section II: Advanced Operations
Deleting a Traffic
Class
This procedure explains how to delete a traffic class. If the traffic class to
be deleted is already part of a QoS policy assigned to one or more switch
ports, you must first modify the policy by removing the port assignments
before you can delete the traffic class. You can reassign the ports back to
the policy after you have deleted the traffic class.
To delete a traffic class, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Services option.
3. Select the Traffic Class tab.
The Traffic Class tab is shown in Figure 64 on page 190
4. Select the traffic class to be deleted and click Delete.
The traffic class is deleted from the switch.
5. To permanently save your changes, select the Save Config menu
selection.
Displaying the
Traffic Classes
To display the traffic classes, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Services.
3. Select the Traffic Class tab.
The Traffic Class tab is shown in Figure 67.
Figure 67. Traffic Class Tab (Monitoring)