Allied Telesis AT-S63 - Manual (Page 284)

Chapter 18: SNMPv3
284 Section III: SNMPv3
The SNMPv3 Notify Table tab is shown in Figure 109.
Figure 109. SNMPv3 Notify Table Tab (Monitoring)
Displaying Target
Address Table
Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 9 on page 57.
2. Select the SNMP Tab.
The SNMP tab is shown in Figure 104 on page 279.
3. In the SNMPv3 section, lick the button next to View Target Address
Table and then click View at the bottom of the tab.