Allied Telesis AT-S63 - Manual (Page 354)

Chapter 22: GARP VLAN Registration Protocol
354 Section V: Virtual LANs
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 138 on page 353.
4. In the View GVRP Parameters section, click View Port
Configuration.
5. Click View.
The GVRP Port Configuration page is shown in Figure 139.
Figure 139. GVRP Port Configuration Page
The GVRP Port Configuration page provides the following information:
Port Number
The port number.
Mode
The port mode, either Normal or None.