Allied Telesis AT-S63 - Manual (Page 280)

Chapter 18: SNMPv3
280 Section III: SNMPv3
The SNMPv3 User Table tab is shown in Figure 105.
Figure 105. SNMPv3 User Table Tab (Monitoring)
Displaying View
Table Entries
To display entries in the SNMPv3 View Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 9 on page 57.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 104 on page 279.
3. In the SNMPv3 section, click the button next to View View Table and
then click View at the bottom of the tab.